A correctly installed cooling system can be more efficient, operate more efficiently, plus last longer.
The A/C air handler, including the evaporator coil plus blower fan, is located indoors, usually in a dedicated Heating, Ventilation plus A/C closet.
A central cooling system also includes a condenser coil plus fan, plus a compressor. A heat exchanger gets heat from the inside of the beach house plus disperses it into the air. It is not recommended to place the condenser in an attic or basement. The heat dispersed by the unit will radiate into the residing areas, reducing household cooling efficiency plus raising operating costs. Furthermore, the indoor air volume is much smaller than outdoors, which will impact air flow into the coil. The heat flows more efficiently from a overheated zone into a cooler 1. As the condenser coil is designed to release compressed heat energy into the air, the heat transport process is most efficient in a cool, shaded location outdoors. As much as possible, the unit should be placed in the shade produced by the house. To disperse heat efficiently, the outdoor condenser of a condenser must have sufficient air circulation. In order to ensure official air intake, there should be at least three feet of space on all sides of the unit. To put it another way, the unit should be satisfactoryly separated from the wall of the beach house plus from any thick vegetation. When the Heating, Ventilation plus A/C unit is situated in direct sun or separate from sufficient air circulation, its compressor motor runs hotter, which generally shortens its life! Because the compressor is the most expensive component in the system, early failure may require replacing the entire system.
electric furnace